LED Light Set (Version 2) for Mini-Z 4x4 Jimny Sierra APIO

Main controller board with LED cable set (15pcs LED) ***designed for on-road conditions***

• 2 Headlights
• 2 Fog lights,
• 6 Turn signal lights (2 front-LED, 2 side-LED, 2 rear-LED)
• 2 Taillights
• 1 Brake light
• 2 Offroad reverse lights

Features

• No soldering and no body-shell modification are required. Installation is nearly Plug and Play. (requires hot melt glue to mount some LEDs to the Jimny body shell)
• Total 15pcs LEDs in 7 groups. They are headlight, left signal, right signal, foglight, tail light, 3rd brake light, and offroad reverse light. Each group is individually controlled by the main controller.
• Warning light, high beam headlight, low beam headlight, and fog light in 4 combinations. These combinations can be selected by the CH4 knob on the remote transmitter KT-531P.
• Built-in accelerometer and gyroscope to sense the movements of the car for flashing turn signal lights and turning on reverse lights.
• Four modes of operation are available. Selection is done by the onboard push button. These modes are normal, flashing headlights in acceleration, Mini-Z standard and all lights turn on.
• Support firmware update via the on-board SWIM connector. SWIM programmer NOT included.
• Full step-by-step installation instructions.

Note:

(1) The light set is designed for on-road conditions for the best result. Some minimum movements are required to trigger the accelerometer to turn on respective LEDs. For crawling, it is suggested to select crawler mode.

(2) The rear lights cable assembly for APIO is slightly different from the standard Jimny. The lengths of each LED are changed to fit the APIO rear bumper.

(3) The brightness of the offroad reverse light is set higher than the standard Jimny.